Phone:
E-mail:
MST300 MOROOKA parts
-
Rubber track 500×100 for MK100S MK60 MK80 CG35 EG40R crawler carrier tracks rental
Crawler carrier Tracks have their own benefits as well, such as relatively low road surface requirements, good cross-country performance, and the protective nature of the track. In order to address the issue of damage to tracked vehicles, some people started to work on the track. For example, the original steel track was replaced with rubber material, which not only greatly reduces damage but also serves other purposes.
-
Tracked dumper chassis sprocket for Morooka truck MST800 MST1500 MST2200 front idler track roller top roller
1. YIKANG company specializes in manufacturing spare parts for crawler dump truck for 18 years.
2. Track roller, sprocket, top roller, front idler and rubber track.
3. MST300,MST800,MST1500,MST2200.
-
Morooka dumper chassis parts front idler for Mst300 truck
1. Morooka MST300 crawler front idler rollers
2. We advise you to maintain your entire undercarriage and replace any worn items at the same time in order to ensure even wear since these rollers are sold separately.
3. On the Morooka MST300 chassis, there are one idler per side , which controls the direction of the track. And there are also track rollers, sprocket, top rollers, etc. On the MST800 chassis, which we also provide.
-
Morooka front idler for MST300 MST600 MST800 MST1500 MST2200 crawler tracked dumper undercarriage parts
A heavy capacity front idler is required for Morooka MST1500 crawler carriers at the back of the undercarriage. The heavy rubber tracks on the MST1500 series require the idler to bear the weight of the track at the back of the machine and maintain tension due to the long undercarriage and heavy track weight. When the idler is brand-new, the wheel has a diameter of almost seventeen and a half inches, so you can measure the wear on your current idler to see how much of the diameter has been worn. At the point where it rests inside the rubber track’s guiding system, the wheel’s actual width is more than two inches. This idler component comes with the installation nuts. Along with these tension idlers, we also have the sprockets, bottom rollers, and top rollers in store. To extend the life of the new parts, inspect your complete undercarriage before placing an order and replace any worn or damaged parts.
-
Front idler MST300 for Morooka dumper
The model NO: MST300 front idler
YIKANG company specializes in production of Morooka rollers for 18 years, including MST300/800/1500/2200 track roller, sprocket, top roller, front idler and rubber track.
-
MST300 track bottom roller for Morooka dumper
The model NO: MST300 track bottom roller
YIKANG company specializes in production of Morooka rollers for 18 years, including MST300/800/1500/2200 track roller, sprocket, top roller, front idler and rubber track.