Phone:
E-mail:
Front idler
-
Morooka dumper chassis parts front idler for Mst300 truck
1. Morooka MST300 crawler front idler rollers
2. We advise you to maintain your entire undercarriage and replace any worn items at the same time in order to ensure even wear since these rollers are sold separately.
3. On the Morooka MST300 chassis, there are one idler per side , which controls the direction of the track. And there are also track rollers, sprocket, top rollers, etc. On the MST800 chassis, which we also provide.
-
MST1500 front idler for crawler tracked dumper rental rubber track undercarriage parts
Zhenjiang Yijiang ur Morooka MST1500 roller has been manufactured to the very highest standards, to O.E.M specifications,so it’s extremely durable. Our Morooka MST1500 roller assemblies will deliver a long service life, even in the most demanding of day-to-day operational environments.
-
Morooka MST2200 front idler for crawler dump truck dumper undercarriage parts
The MST2200 crawler transport cart require a heavy duty tension front idler at the rear of the undercarriage. The rubber tracks on the MST2200 are very heavy so the undercarriage combined with the extensive weight of the track require the idler to maintain tension and carry the weight of the track at the rear of the machine.
-
Drive sprocket MST800 MST1500 MST2200 for Morooka crawler tracked dumper rubber track undercarriage parts
To simplify transport and installation, Morooka MST2200 sprockets are offered in four distinct sections. Since the four components together weigh 61kg, they make the installation process easier. If you only need one sprocket, we can pack it up and deliver it via ground, saving you time. Even if worn, we recommend that you replace the rubber Morooka MST2200 tracks and sprockets at the same time. These sprockets are a guaranteed direct replacement for the models mentioned below. This sprocket is unique to the Morooka version with a small selection. We also sell MST series carrier bottoms, top rollers, and front idlers.
-
Morooka front idler for MST300 MST600 MST800 MST1500 MST2200 crawler tracked dumper undercarriage parts
A heavy capacity front idler is required for Morooka MST1500 crawler carriers at the back of the undercarriage. The heavy rubber tracks on the MST1500 series require the idler to bear the weight of the track at the back of the machine and maintain tension due to the long undercarriage and heavy track weight. When the idler is brand-new, the wheel has a diameter of almost seventeen and a half inches, so you can measure the wear on your current idler to see how much of the diameter has been worn. At the point where it rests inside the rubber track’s guiding system, the wheel’s actual width is more than two inches. This idler component comes with the installation nuts. Along with these tension idlers, we also have the sprockets, bottom rollers, and top rollers in store. To extend the life of the new parts, inspect your complete undercarriage before placing an order and replace any worn or damaged parts.
-
Morooka MST800 front idler for crawler tracked dumper rental
A heavy capacity front idler is required for Morooka MST800 crawler carriers at the back of the undercarriage. The heavy rubber tracks on the MST800 series require the idler to bear the weight of the track at the back of the machine and maintain tension due to the long undercarriage and heavy track weight. When the idler is brand-new, the wheel has a diameter of almost seventeen and a half inches, so you can measure the wear on your current idler to see how much of the diameter has been worn. At the point where it rests inside the rubber track’s guiding system, the wheel’s actual width is more than two inches. This idler component comes with the installation nuts. Along with these tension idlers, we also have the sprockets, bottom rollers, and top rollers in store. To extend the life of the new parts, inspect your complete undercarriage before placing an order and replace any worn or damaged parts.
-
Bottom track roller for MST600 MST800 MST1500 MST2200 rubber track dump truck
YIJIANG company is specialized in manufacturing crawler dump truck parts for MOROOKA，including track roller or bottom roller, sprocket, top roller, front idler and rubber track.
-
MST800 front idler for crawler carrier trucks
A heavy capacity tension idler is required for Morooka MST800 crawler carriers at the back of the undercarriage. The heavy rubber tracks on the MST800 series require the idler to bear the weight of the track at the back of the machine and maintain tension due to the long undercarriage and heavy track weight.
-
Front idler MST300 for Morooka dumper
The model NO: MST300 front idler
YIKANG company specializes in production of Morooka rollers for 18 years, including MST300/800/1500/2200 track roller, sprocket, top roller, front idler and rubber track.
-
MST1500 front idler for Morooka dumper
The model NO: MST1500 front idler
YIKANG company specializes in production of Morooka rollers for 18 years, including MST300/600/800/1500/2200 /3000 series track roller, sprocket, top roller, front idler and rubber track.
-
MST800 front idler fit Morooka crawler tracked dumper
The front idler roller is mainly used to support and guide the track, so that it can maintain the correct trajectory during the driving process, the front idler roller also has a certain shock absorption and buffer function, can absorb part of the impact and vibration from the ground, provide a smoother driving experience, and protect the other parts of the vehicle from excessive vibration damage
YIKANG company is specialized in manufacturing spare parts for crawler dump truck, including track roller, sprocket, top roller, front idler and rubber track.
This idlert is suitable for Morooka MST800
The weight: 50kg