Morooka Rollers
-
MST800 MST1500 top upper roller for Morooka dump truck
1. Yijiang company specializes in production of Morooka rollers for 18 years. The rollesr have been manufactured to a very highest standards;
2. We can provide Morooka chassis parts, including track bottom roller, front idler, sprocket, .top roller and rubber /steel track;
3. Our products export to Europe and USA, and the quality has been fully recognized by customers
-
MST1500 front idler for crawler tracked dumper rental rubber track undercarriage parts
Zhenjiang Yijiang ur Morooka MST1500 roller has been manufactured to the very highest standards, to O.E.M specifications,so it’s extremely durable. Our Morooka MST1500 roller assemblies will deliver a long service life, even in the most demanding of day-to-day operational environments.
-
Morooka MST2200 front idler for crawler dump truck dumper undercarriage parts
The MST2200 crawler transport cart require a heavy duty tension front idler at the rear of the undercarriage. The rubber tracks on the MST2200 are very heavy so the undercarriage combined with the extensive weight of the track require the idler to maintain tension and carry the weight of the track at the rear of the machine.
-
Morooka drive sprocket for crawler tracked dumper rubber track undercarriage parts MST800 MST1500 MST2200
To simplify transport and installation, Morooka MST2200 sprockets are offered in four distinct sections. Since the four components together weigh 61kg, they make the installation process easier. If you only need one sprocket, we can pack it up and deliver it via ground, saving you time. Even if worn, we recommend that you replace the rubber Morooka MST2200 tracks and sprockets at the same time. These sprockets are a guaranteed direct replacement for the models mentioned below. This sprocket is unique to the Morooka version with a small selection. We also sell MST series carrier bottoms, top rollers, and front idlers.
-
MST2200 top roller for crawler carrier tracks undercarriage parts
Looking for a heavy-duty top roller that can withstand the weight of your Morooka MST2200 crawler carrier? Look no further than the Morooka MST2200 top roller.
Designed specifically for the MST2200 series, these top rollers are a crucial component of the carrier’s undercarriage system. In fact, each MST2200 carrier requires two top rollers per side, for a total of four top rollers per machine.
-
Morooka front idler for MST300 MST600 MST800 MST1500 MST2200 crawler tracked dumper undercarriage parts
A heavy capacity front idler is required for Morooka MST1500 crawler carriers at the back of the undercarriage. The heavy rubber tracks on the MST1500 series require the idler to bear the weight of the track at the back of the machine and maintain tension due to the long undercarriage and heavy track weight. When the idler is brand-new, the wheel has a diameter of almost seventeen and a half inches, so you can measure the wear on your current idler to see how much of the diameter has been worn. At the point where it rests inside the rubber track’s guiding system, the wheel’s actual width is more than two inches. This idler component comes with the installation nuts. Along with these tension idlers, we also have the sprockets, bottom rollers, and top rollers in store. To extend the life of the new parts, inspect your complete undercarriage before placing an order and replace any worn or damaged parts.
-
Morooka MST800 front idler for crawler tracked dumper rental
A heavy capacity front idler is required for Morooka MST800 crawler carriers at the back of the undercarriage. The heavy rubber tracks on the MST800 series require the idler to bear the weight of the track at the back of the machine and maintain tension due to the long undercarriage and heavy track weight. When the idler is brand-new, the wheel has a diameter of almost seventeen and a half inches, so you can measure the wear on your current idler to see how much of the diameter has been worn. At the point where it rests inside the rubber track’s guiding system, the wheel’s actual width is more than two inches. This idler component comes with the installation nuts. Along with these tension idlers, we also have the sprockets, bottom rollers, and top rollers in store. To extend the life of the new parts, inspect your complete undercarriage before placing an order and replace any worn or damaged parts.
-
Bottom track roller for crawler track dumper Morooka MST800 bottom carrier roller MST1500 front idler MST2200 sprocket top roller
Online retailers offer the Morooka MST300 crawler carrier bottom rollers with free delivery. We advise you to maintain your entire undercarriage and replace any worn items at the same time in order to ensure even wear since these rollers are sold separately. On the Morooka MST300, there are eight of these bottom rollers per side visible from the side, but the number of rollers per undercarriage may vary based on your model. These bottom rollers,attach from the side using one screw per side. The installation hardware is also included when the rollers are delivered to your door completely assembled and prepared for installation.
-
Bottom track roller for MST600 MST800 MST1500 MST2200 rubber track dump truck
Online retailers offer the Morooka MST1500 crawler carrier bottom rollers with free delivery. We advise you to maintain your entire undercarriage and replace any worn items at the same time in order to ensure even wear since these rollers are sold separately. On the Morooka MST1500, there are eight of these bottom rollers per side visible from the side, but the number of rollers per undercarriage may vary based on your model. These bottom rollers, part number 1-17350-0010, attach from the side using one screw per side. The installation hardware is also included when the rollers are delivered to your door completely assembled and prepared for installation. This roller can be used in place of factory original component number 1-51350-1100.
-
Top roller for MST800 MST1500 MST1500V MST1500VD MST2200 MST2200VD crawler carrier trucks rental
Two top rollers are needed per side for a total of four top rollers on each Morooka MST2200 crawler carriage. The MST2200 series’ rubber tracks are very heavy, so in contrast to smaller machinery, the long undercarriage and substantial weight of the track necessitate an extra carrier roller. The bottom rollers, sprockets, and top rollers are all in order. Before placing an order, inspect your complete undercarriage and replace any worn or damaged parts to extend the life of the new components. The axle of the dual flange rollers has a steel plate through which the carrying rollers are fastened to the track dumpers. Use your original bolts for an assured perfect fit since bolts are not included with the shipment.
-
MST800 front idler for crawler carrier trucks
A heavy capacity tension idler is required for Morooka MST800 crawler carriers at the back of the undercarriage. The heavy rubber tracks on the MST800 series require the idler to bear the weight of the track at the back of the machine and maintain tension due to the long undercarriage and heavy track weight.
-
Top upper roller for MST800 dumper undercarriage
The model NO: MST800 top upper roller
YIKANG company specializes in production of Morooka rollers for 18 years, including MST300/800/1500/2200 track roller, sprocket, top roller, front idler and rubber track.